20 mm 2.4 MHz Wired Atomizing Disc
20 mm 2.4 MHz Wired Atomizing Disc — overall view Configuration photograph. Confirm the supplied component against the final drawing.
20 mm 2.4 MHz Wired Atomizing Disc
Configuration photograph. Confirm the supplied component against the final drawing.
A 20 mm ceramic atomizing disc with attached leads and a two-position connector. Its 2.4 MHz format is intended for integration with a matched ultrasonic atomizer driver.
Specification status: Preliminary catalog specifications. Confirm all design-critical values with engineering before design freeze.
Technical Specifications
Available catalog specifications are shown below. Missing groups remain omitted instead of being filled with generic values; procurement entries are project-specific guidance.
Application Fit
- •Ultrasonic humidifier assemblies.
- •Atomizer component development with a matched 2.4 MHz driver.
Features
- ✔Compact wired format for atomizer assemblies.
- ✔Front and back contact geometry shown in the product photographs.
- ✔Connector and lead requirements can be specified with the assembly drawing.
Applications
- •Ultrasonic humidifier assemblies.
- •Atomizer component development with a matched 2.4 MHz driver.
Need Engineering Support for 20 mm / 2.4 MHz / wired?
Send the component drawing, dimensions and tolerances, electrode and polarization requirements, driving conditions, intended assembly and quantity.
Engineering Tools and Supplier Resources
Estimate common PZT design parameters before sending an RFQ.
See material control, customization scope, and engineering support.
Review material grades and selection criteria.
Engineering Links
Browse the wider product family and compare adjacent models.
25 mm 1.7 MHz Wired Atomizing Assembly
A wired atomizing assembly with a circular ceramic element, surrounding mounting ring and two-position connector. The nominal 25 mm, 1.7 MHz format supports integration into a dedicated humidifier assembly.
Request Specifications & Pricing for 20 mm / 2.4 MHz / wired
Get detailed datasheets, OEM pricing, and lead time for the 20 mm / 2.4 MHz / wired. MOQ and sample availability are confirmed after the component drawing, configuration and requested quantity are reviewed. Required drawings, specification revisions and available electrical or batch inspection records are confirmed during quotation.
The email opens pre-filled with a short spec checklist — partial details are fine. Typical reply within one business day.
Integration and specification review
Nominal dimensions and frequency support initial selection. Electrical drive limits, liquid compatibility and atomizing output are specified for the agreed assembly and test conditions.
- •Confirm frequency tolerance, impedance and capacitance with the intended driver.
- •Specify the voltage waveform, operating liquid, water depth and mounting boundary conditions.
- •Confirm the wetted-surface material, lead length and connector pin assignment.
Key Specifications
Performance
| Nominal frequency | 2.4 MHz |
|---|
Mechanical
| Nominal diameter | 20 mm |
|---|---|
| Nominal ceramic thickness | 0.85 mm |
Integration
| Connection format | Two attached leads with a two-position connector |
|---|
Procurement
| MOQ / Sample Policy | MOQ and sample availability are confirmed after the component drawing, configuration and requested quantity are reviewed.PROJECT-SPECIFIC |
|---|---|
| Sample Lead Time | Sample lead time is confirmed after material, electrode, dimensional and electrical requirements are reviewed.PROJECT-SPECIFIC |
| Production Lead Time | Production lead time is quoted after the order drawing, validation scope and quantity are confirmed.PROJECT-SPECIFIC |
| Customization Scope | Changes to ceramic geometry, electrode pattern, electrical targets and the assembly interface require drawing and feasibility review.PROJECT-SPECIFIC |
| Available Documents & Reports | Required drawings, specification revisions and available electrical or batch inspection records are confirmed during quotation.PROJECT-SPECIFIC |